Термический анализ : LABSYS evo TGA

TGA, from ambient to 1150°C or 1600°C

LABSYS evo is a user friendly, robust and highly powerful thermal analysis platform.

• A comprehensive line of thermal analyzers with two temperature ranges chosen and optimized for distinct families of application:
– RT – 1 150 °C, a cost effective solution mostly (but not only) for organic materials studies (polymers, pharmaceuticals, petroleum by-products…),
– RT – 1 600 °C, for demanding high temperature experiments involving mostly (but not only) inorganic materials like ceramics or metals.
• A top loading balance designed specifically for thermal analysis applications featuring unmatched stability, reproducibility and accuracy.
• A 30 samples / 6 references autosampler able to automatically configure to the different sensors and crucibles.

Controlled vacuum option
This option allows for operation under controlled vacuum. One can manually set a controlled pressure down to 30 mbar. Evolved gas analysis by MS coupling is possible at the same time.

Large volume crucible
A large volume 1000 µl (1 ml) alumina crucible, diameter 8mm and height 27 mm, is available for TGA experiments.


Temperature Range Room temperature to 1 150 °C
Room temperature to 1 600 °C
Isothermal temperature accuracy +/- 1 °C
Programmable temperature scanning rate (heating and cooling 0.01 to 100 °C.min-1
Furnace cooling 30 min (1 150 °C to 50 °C)
32 min (1 600 °C to 50 °C)
Maximum balance capacity 20 g
Weight range +/- 1 000 mg; +/- 200 mg
Weighing precision +/- 0.01 %
TG resolution 0.2 μg; 0.02 μg
Auto Sampler 30 samples and 6 references 4-prong gripper
Vacuum < 10-1 mbar
Evolved Gas Analysis MS, FTIR, GC/MS coupling
Gas Flow Control
Two inlets for gas scanning (inert or reactive)
Option: 3 carrier gases (MFC from 4 to 200 ml/min) and 1 auxiliary or reactive gas (MFC from 0.3 to 16 ml/min)*
Weight 55 kg / 121 lbs
Dimensions (Height / Width / Depth) 56 closed, 76 opened / 53 / 58 cm (22.0 closed 29.9 opened / 20.8 / 22.8 in)
Power requirements 230 V – 50/60 Hz

Характерные особенности

LABSYS evo TGA sensor is an alumina based rod held by the balance and equipped with a sample temperature measurement thermocouple. The sample is held in an alumina (440 μL) or platinum
(500 μL) crucible.

The state-of-the-art Calisto data treatment software allows for numerous automatic operations
like blank subtraction for hassle free buoyancy effect correction, DTG signal calculation for easier identification of start and end temperatures of mass variations, signals overlay for data comparison, and all the features necessary to treat data routinely according to recommended ASTM, ISO or other testing standards.

LABSYS evo offers a “Plug & play” gas analyzer coupling device,enabling simultaneous MS and FTIR connections. The coupling device is heated up to 300 °C to avoid any gas condensation and is complete ly insulated for a safe handling.

A NEW auto sampler system is available for Labsys evo TGA,  30 samples possibilities.

Области применения

LABSYS evo TGA 1150 is typically applied to polymers, pharmaceuticals, biomaterials and other organic substances like coal, oils, lubricants…

Studied phenomena range from desorption, solid-gas reactions, to decomposition, (pyrolysis, combustion…) in order to determine:

  • Compositional analysis: ashes, carbon, fillers, additives’ contents and their effect on thermal stability / material quality / product performance,
  • Moisture, solvent contents of pharmaceuticals,
  • Volatiles analysis: absorbed, bound, or occluded,
  • Loss on drying of VOC in metal working fluids, lubricants…
  • Kinetics, thermal ageing/endurance.

High temperature LABSYS evo TGA 1600 is particularly necessary to characterize inorganic materials like ceramics, glasses, cermets, nanomaterials, metals, alloys, cements, plaster, minerals, composites…

Based on the variations of the TGA signals due to dehydration, dehydroxylation, decarbonatation, oxidation and other typical phenomena, it becomes possible to study:

  • Their composition and its influence on their thermal stability / resistance,
  • The efficiency of their synthesis routes,
  • Regeneration / coke content of catalysts,
  • Corrosion resistance properties.



This is an extract of our documentation, please register to have access to all documentation


Термический анализ : LABSYS evo TGA par SETARAM